Delta DVP-15MC Series User Manual

DVP-15MC Series Motion Controller Operation Manual
12-20
12
1
System error code
Explanation Correction
Hexadecimal
Decimal
101A 4122 The Retain file is too large.
There are too many Retain variables.
Decrease the number of Retain variables and
then redownload the program.
101B 4123 The access to Retain file failed.
Redownload the program after restoring the
system to the factory setting.
101C 4124
EIP configuration data upload
failed.
Contact local technicians if the problem still
exists after re-downloading the program.
101D 4125
Cam table reading failed.
Contact local technicians if the problem still
exists after re-downloading the program.
1020 4128
Illegal configuration file type
Contact local technicians if the problem still
exists after re-downloading the program.
1021 4129
File storage failure
Contact local technicians if the problem still
exists after re-downloading the program.
1022 4130
File reading failed
Contact local technicians if the problem still
exists after re-downloading the program.
1023 4131
File check failure
Contact local technicians if the problem still
exists after re-downloading the program.
1024 4132
File size exceeds allowed range.
Contact local technicians if the problem still
exists after re-downloading the program.
1025 4133
Program file reading failed.
Contact local technicians if the problem still
exists after re-downloading the program.
1026 4134
CANopen configuration file
reading failed
Contact local technicians if the problem still
exists after re-downloading the program.
1027 4135
Motion configuration file reading
failed
Contact local technicians if the problem still
exists after re-downloading the program.
1028 4136
System configuration file reading
failed
Contact local technicians if the problem still
exists after re-downloading the program.
1029 4137
Task configuration file reading
failed
Contact local technicians if the problem still
exists after re-downloading the program.
102A 4138
Extension configuration file
reading failed
Contact local technicians if the problem still
exists after re-downloading the program.
102B 4139
Cam file reading failed.
Contact local technicians if the problem still
exists after re-downloading the program.
102C 4140
RETAIN file reading failed.
Contact local technicians if the problem still
exists after re-downloading the program.
102D 4141
ID file reading failed.
Contact local technicians if the problem still
exists after re-downloading the program.
102E 4142
Encrypted file reading failed.
Contact local technicians if the problem still
exists after re-downloading the program.
102F 4143
CNC file reading failed.
Contact local technicians if the problem still
exists after re-downloading the program.
1030
4144
Hardware does not match.
Contact local technicians.
1031 4145 Position parser processing fault
Contact local technicians.
1401
5121
The initializing of Ethernet LAN1
failed.
Contact local technicians
if the error still exists
after repower on.
1402 5122
The Ethernet LAN1 buffer
overflows
1403 5123
The data sending failed through
the Ethernet LAN1.
1404 5124
Sending the buffer memory
distribution through Ethernet
failed.
1405 5125
The IP address of other device is
the same as that of the PLC on the
Ethernet network.
Ensure that no identical IP addresses exist on
the network by changing the IP address of
other device or the controller.
1601 5633
The Ethernet LAN2 initializing
failed.
Contact local technicians if the error still exists
after repower on.
1602 5634
The Ethernet LAN2 buffer
overflows.

Delta DVP-15MC Series Specifications

General

Brand	Delta
Model	DVP-15MC Series
Category	Controller
Language	English