Delta DVP-15MC Series User Manual

Chapter 8 Logic Instructions
8-7
8_
Instruction set Instruction code Function
Selection Instructions
MAX Maximum
MIN Minimum
SEL Selection
MUX Multiplexer
LIMIT Limiter
BAND Deadband Control
ZONE Dead Zone Control
Data Type Conversion
Instructions
BOOL_TO_*** Bool Conversion Group
Bit strings_TO_*** Bit String Conversion Group
Integers_TO_*** Integer Conversion Group
Real numbers_TO_*** Real Number Conversion Group
Times,dates_TO_*** Time and Data Conversion Group
Text strings_TO_*** String Conversion Group
Communication
Instructions
DMC_ReadParameter_CANopen
Read a parameter value
DMC_WriteParameter_CANopen
Write a parameter value
ETH_Link_Config
Configure MODBUS TCP data exchange
ETH_Link_Manage
Enable/disable MODBUS TCP data
exchange
ETH_Link_Status
Watch MODBUS TCP data exchange
status
ETH_Link_Config_Ext
Configure the extension parameters for
MODBUS TCP exchange
ETH_ SetServerlinkkeeptime
Set the connection duration time as the
controller works as a slave
ETH_Socket_Manage
Manage Socket TCP/UDP
ETH_Socket_Config
Configure Socket data exchange
parameters
ETH_Socket_Open
Enable Socket
ETH_Socket_Send
Send Socket data
ETH_Socket_Receive Receive Socket data
ETH_Socket_Close Disable Socket
ETH_Socket_Status Read Socket status
RS485_Link_Manage
Manage RS485 communication
RS485_Link_Config
Configure RS485 communication
parameters
RS485_Link_Status
Watch RS485 communication status
RS485_RS
Configure RS485 free protocol parameters

Delta DVP-15MC Series Specifications

General

Brand	Delta
Model	DVP-15MC Series
Category	Controller
Language	English