TC Troubleshooting
Doc. 065031-04 1/08 237
This error occurs if, during a firmware (Moduleware) download, the new
firmware cannot be programmed into memory.
To troubleshoot:
Flash memory cannot be serviced by the user. Contact Dionex for assistance.
This error occurs when you select a command (RotorSealChanged, for
example) that updates information stored in the TC. To prevent information
from being inadvertently changed, Chromeleon or Chromeleon Xpress
requests confirmation before executing the command.
To troubleshoot:
If you want to execute this command, click Execute; otherwise, click Cancel.
This error occurs if you attempt to issue a command while firmware
(Moduleware) is being downloaded to the TC.
To troubleshoot:
Wait until the firmware download is complete. Audit Trail messages will
inform you of the status of the download.
Error programming flash memory.
Executing this command will reset associated counter values
stored in the module.
Firmware download in progress. Please wait.
To Next Page
Loading...
