Doosan Robotics User Manual v2.6.1
7.7 Machine Tool Setting
Machine tools are the main work devices that interact with the robot, and the machine tools that can be
registered in the Workcell Manager are as follows:
It turns cylindrical materials to allow the material to be
cut to the desired shape using a tool turret.
This is a machine that compresses a flat material to
form a desired shape.
This is a device that injects materials such as plastic into
a mold and forms it into the desired shape.
Machine tool settings are similar to those of the gripper settings.
For more information about each machine tool settings, refer to the separate Reference Manual
provided.
To Next Page
Loading...
