12. Environment Setting
To configure environment settings related to the operation setting, tap the Settings button in the main
menu.
Note
When the Task Builder and Task Writer screens are changed to the Play tab, the Settings
button on the main menu is disabled.
12.1 Language Setting
To set the UI language of the operation program, follow these steps:
1 Tap the Setting button on the main menu and select Local > Language.
2 Select the language from the language list and tap the Confirm button.
3 To change the SI units to U.S. units, select “English (INCH)” and tap the Confirm button.
The units displayed on the program change to U.S. units.
4 Restart the system.
To Next Page
Loading...
