Chapter 8
| Authentication Commands
Telnet Server
– 266 –
Command Mode
Global Configuration
Example
Console(config)#ip telnet port 123
Console(config)#
ip telnet server This command allows this device to be monitored or configured from Telnet. Use
the no form to disable this function.
Syntax
[no] ip telnet server
Default Setting
Enabled
Command Mode
Global Configuration
Example
Console(config)#ip telnet server
Console(config)#
show ip telnet This command displays the configuration settings for the Telnet server.
Command Mode
Normal Exec, Privileged Exec
Example
Console#show ip telnet
IP Telnet Configuration:
Telnet Status: Enabled
Telnet Service Port: 23
Telnet Max Session: 8
Console#
To Next Page
Loading...
