Chapter 2
| Using the Web Interface
Navigating the Web Browser Interface
– 81 –
PIM 759
General
Enables PIM globally for the switch
759
Interface
Enables PIM per interface, and sets the mode to dense or sparse
760
Neighbor
Displays information neighboring PIM routers
765
SM
Configure Global
Configures settings for register messages, and use of the SPT
766
BSR Candidate
Configures the switch as a BSR candidate
767
RP Address 769
Add
Sets a static address for an RP and the associated multicast
group(s)
769
Show
Shows the static addresses configured for each RP and the
associated multicast groups
769
RP Candidate 770
Add
Advertises the switch as an RP candidate to the BSR for the
specified multicast groups
770
Show
Shows the multicast groups for which this switch is advertising
itself as an RP candidate to the BSR
770
Show Information
Show BSR Router
Displays information about the BSR
772
Show RP Mapping
Displays the active RPs and associated multicast routing entries
774
PIM6
PIM for IPv6
775
General
Enables PIM globally for the switch
775
Interface
Enables PIM per interface, and sets the mode to dense or sparse
775
Neighbor
Displays information neighboring PIM routers
781
SM
Configure Global
Configures settings for register messages, and use of the SPT
781
BSR Candidate
Configures the switch as a BSR candidate
783
RP Address 784
Add
Sets a static address for an RP and the associated multicast
group(s)
784
Show
Shows the static addresses configured for each RP and the
associated multicast groups
784
RP Candidate 786
Add
Advertises the switch as an RP candidate to the BSR for the
specified multicast groups
786
Show
Shows the multicast groups for which this switch is advertising
itself as an RP candidate to the BSR
786
Table 4: Switch Main Menu (Continued)
Menu Description Page
To Next Page
Loading...
Need help?
General