EMC Connectrix DS-32M2 User Manual

D
D-28 Connectrix DS-32M2 User Guide
Command Line Interface
Parameters This command has one parameter.
Command Examples
Root> config snmp authTraps true
Root> config snmp authTraps 1
config.snmp.deleteCommunity
Syntax deleteCommunity commIndex
Purpose This command entirely deletes a community from the SNMP.
Parameters This command has one parameter.
Command Example
Root> config snmp deleteCommunity 5
config.snmp.show
Syntax show
Purpose This command shows the switch SNMP configuration.
Parameters This command has no parameters.
Command Example
Root> config snmp show
enabledState
Specifies whether the authorization traps are
enabled. Valid values are true and false.
Boolean 1 or 0 may be substituted as values.
commIndex
Specifies the community to be deleted. Valid
values are integers 1 through 6. This value was
set in the commIndex parameter of the
config.snmp.addCommunity command.

EMC Connectrix DS-32M2 Specifications

General

Brand	EMC
Model	Connectrix DS-32M2
Category	Switch
Language	English