D
CLI OverviewThe config Branch
D-31
Command Line Interface
config.switch.prefDomainId
Syntax prefDomainId domainId
Purpose This command sets the preferred domain ID for the switch.
Description The switch must be off line before issuing this command. Use
maint.system.setOnlineState to set the switch off line.
Parameters This command has one parameter.
Command Example
Root> config switch prefDomainId 1
config.switch.priority
Syntax priority switchPriority
Purpose This command sets the switch priority.
Description The switch must be off line before issuing this command. Use
maint.system.setOnlineState to set the switch off line.
domainId
Specifies the new preferred domain ID value.
This parameter must be an integer in the range
1 through 31.
To Next Page
Loading...