EasyManuals Logo
Home>Epson>All in One Printer>WF-C5890 Series

Epson WF-C5890 Series User Manual

Epson WF-C5890 Series
491 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #122 background imageLoading...
Page #122 background image
Making Settings for the Printer's Fax Features According to Use
You can congure the printer's fax features individually using the printer's control panel according to use. e
settings made using Fax Setting Wizard can also be changed. For more details, see the descriptions of the Fax
Settings menu.
“Fax Settings
” on page 377
Note:
Using Web Cong, you can congure the printer's fax features.
When you use Web Cong to display the Fax Settings menu, there may be slight dierences in the user interface and in
location compared to the printer's control panel.
Related Information
& “Settings for a PBX Phone System” on page 122
& “Receiving Incoming Faxes” on page 235
& “Making Settings When You Connect a Phone Device” on page 123
& “Settings to Save and Forward Received Faxes” on page 124
& “Settings to Save and Forward Received Faxes with Specic Conditions” on page 127
& “Making Settings for Blocking Junk Faxes” on page 132
& “Making Settings to Send and Receive Faxes on a Computer” on page 133
Settings for a PBX Phone System
Making Settings to Use the Access Code when Dialing an External Line
Make the following settings if you need to use numbers such as 0 or 9 as they are instead of as part of an external
access code.
1. Select Settings on the printer's control panel.
2. Select General Settings > Fax Settings > Basic Settings.
3.
Select Line Type, and then select PBX.
4. When sending a fax to an outside fax number using the actual external access code, select the Access Code
box, and then select Do Not Use.
5. Select OK to apply the settings.
Making Settings to Send Faxes Using External Access Code (#)
You can send faxes to an outside fax number using # (hash) instead of the actual external access code such as 0 or
9.
1. Select Settings on the printer's control panel.
2. Select General Settings > Fax Settings > Basic Settings.
3. Select Line Type, and then select PBX.
Preparing the Printer and Making Initial Settings
>
Settings for Printing, Scanning, Copying and F
a
122

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson WF-C5890 Series and is the answer not in the manual?

Epson WF-C5890 Series Specifications

General IconGeneral
BrandEpson
ModelWF-C5890 Series
CategoryAll in One Printer
LanguageEnglish

Related product manuals