Fargo DTC550 User Manual

FOR RESTRICTED USE only Fargo Electronics, Inc.
DTC550 Direct to Card Printer/Encoder User Guide (Rev. 2.8)
viii
Changing the DHCP Setting________________________________________________________ 7-55
Changing the ANEG setting________________________________________________________ 7-56
Saving addresses_________________________________________________________________ 7-57
Resetting Passwords______________________________________________________________ 7-57
Accessing the IP address of your Printer_________________________________________________ 7-58
Accessing the DTC550 IP address ___________________________________________________ 7-58
Ethernet Printer Troubleshooting Procedures_____________________________________7-59
Troubleshooting procedures ________________________________________________________ 7-59
Verifying the Printer Connection ____________________________________________________ 7-60
Verifying the Printer IP address _____________________________________________________ 7-60
Verifying that your PC can access the Printer using the ping command ______________________ 7-61
Printing a test page _______________________________________________________________ 7-62
Reviewing Frequently-asked Questions __________________________________________7-63
Glossary of Terms ____________________________________________________________7-70
Section 8: Cleaning________________________________________________________8-1
Cleaning Kit Instructions - DTC550 Printer _______________________________________________ 8-1
Introduction _____________________________________________________________________ 8-1
Supplies Included _________________________________________________________________ 8-1
Cleaning the Printhead (D855055)____________________________________________________ 8-2
Replacing the Card Cleaning Roller___________________________________________________ 8-3
Cleaning the Platen and Card Feed Rollers _____________________________________________ 8-7
Cleaning the Platen_______________________________________________________________ 8-12
Cleaning the Printer's Exterior ______________________________________________________ 8-13
Cleaning the Printer's Interior_______________________________________________________ 8-13
Section 9: Diagnostic Tool Utility_____________________________________________9-1
Selecting the Self Tests tab ____________________________________________________________ 9-1
Selecting the Barcode Test Card button ________________________________________________ 9-2
Selecting the YMCK Test Card Self Test button _________________________________________ 9-2
Selecting the Magnetic Self Test button________________________________________________ 9-2
Selecting the Color Bars Self Test button_______________________________________________ 9-2
Selecting the Alignment Self Test button_______________________________________________ 9-3
Selecting the Device Settings Self Test button___________________________________________ 9-3
Section 10: Packing the DTC550 Card Printer _________________________________10-1
Packing the Printer _______________________________________________________________ 10-1
Section 11: LCD On-Line Menu Navigation___________________________________11-1
Entering the LCD Menu and selecting the Option _______________________________________ 11-1
Using the Softkey and Scroll buttons _________________________________________________ 11-2
Accessing the Menu Option Structure Tree ____________________________________________ 11-3
Selecting from the Menu Option Structure Tree (displayed, below) _________________________ 11-3
Print TOF and Print EOF Alignment Procedures________________________________________ 11-7
Using the LCD Menu _____________________________________________________________ 11-8
Printing the Self-test______________________________________________________________ 11-9
Reviewing the Gray/Align YMC/K Self-Test __________________________________________ 11-9
Reviewing the Color/Resin YMCK Self-Test _________________________________________ 11-10
Reviewing the Card Count YMC Self-Test ___________________________________________ 11-11
Reviewing the Standard Resin Self-Test _____________________________________________ 11-12
Using the Magnetic Test option (only with Magnetic Encoding Module) ____________________ 11-13
Setting up the Printer ____________________________________________________________ 11-13
Adjusting the Print TOF and Print EOF ______________________________________________ 11-14
Setting the Print TOF ____________________________________________________________ 11-14
Setting the Print EOF ____________________________________________________________ 11-16

Fargo DTC550 Specifications

General

Brand	Fargo
Model	DTC550
Category	Printer
Language	English