Fargo DTC550 User Manual

FOR RESTRICTED USE only Fargo Electronics, Inc.
DTC550 Direct to Card Printer/Encoder User Guide (Rev. 2.8)
vii
Reviewing the Telnet Server ________________________________________________________ 7-4
Network Management Interface _________________________________________________7-5
Telnet Command Line Interface _________________________________________________7-6
Initiating a Telnet Session __________________________________________________________ 7-6
Reviewing the Telnet Command Table ________________________________________________ 7-7
Ethernet Web Pages – Standard Procedures ______________________________________7-13
Reviewing Web page security_________________________________________________________ 7-13
Logging In________________________________________________________________________ 7-14
Accessing the Home pages ___________________________________________________________ 7-15
Accessing the DTC550 Home Page __________________________________________________ 7-15
Reviewing the Ethernet Home Pages ___________________________________________________ 7-16
Reviewing the DTC550 Home Page__________________________________________________ 7-16
Reviewing the Home Page Categories and Fields (table)__________________________________ 7-17
Configuring the Network Settings______________________________________________________ 7-18
Accessing the Network Settings page_________________________________________________ 7-18
Reviewing the Interface ___________________________________________________________ 7-19
Reviewing the Current Settings _____________________________________________________ 7-19
Switching to the automatic IP address mode ___________________________________________ 7-20
Changing to the static IP address mode _______________________________________________ 7-21
Using the Clear Changes button _____________________________________________________ 7-23
Using the Ribbon Information page ____________________________________________________ 7-24
Using the TCP/IP page ______________________________________________________________ 7-25
Using the DTC550 TCP/IP Status Web Page___________________________________________ 7-26
Using the Printer page_______________________________________________________________ 7-27
Using the System Log page___________________________________________________________ 7-29
Changing the Log Name___________________________________________________________ 7-30
Selecting the Log Type____________________________________________________________ 7-31
Selecting the Log Destination_______________________________________________________ 7-33
Setting up Email Event logging _____________________________________________________ 7-34
Specifying UDP Event logging _____________________________________________________ 7-35
Specifying TCP Event logging______________________________________________________ 7-36
Using the Administration pages _______________________________________________________ 7-38
Using the System Information page __________________________________________________ 7-38
Changing the Root Password _______________________________________________________ 7-40
Using the Reboot pages______________________________________________________________ 7-41
Rebooting the Printer (DTC550 only) ________________________________________________ 7-42
Upgrading the Main Firmware ______________________________________________________ 7-43
Using the Help page ________________________________________________________________ 7-47
Additional Procedures ________________________________________________________7-48
Reviewing LED and Dipswitch Tables__________________________________________________ 7-48
Reviewing the DTC550 LED and Dipswitch Table ______________________________________ 7-48
Reviewing the DTC550 LED Table__________________________________________________ 7-49
Upgrading the Main Firmware with the Fargo Diagnostics Utility_____________________________ 7-50
Restoring the Factory Settings for Ethernet ______________________________________________ 7-52
Resetting the DTC550 settings______________________________________________________ 7-52
Reviewing the DTC550 Network Settings _______________________________________________ 7-52
Reviewing the DHCP setting _______________________________________________________ 7-52
Reviewing the Gateway Setting _____________________________________________________ 7-52
Reviewing the Subnet Mask Setting__________________________________________________ 7-53
Reviewing the MAC Address_______________________________________________________ 7-53
Reviewing the ANEG Setting_______________________________________________________ 7-54
Changing the DTC550 LCD Network Settings____________________________________________ 7-55
Accessing the Network Setup Menu__________________________________________________ 7-55

Fargo DTC550 Specifications

General

Brand	Fargo
Model	DTC550
Category	Printer
Language	English