Fuji Xerox ApeosPort-IV C7780 Administrator's Guide

Error Code
473
Problem Solving
15
012-211
012-212
012-213
012-214
012-215
012-216
012-217
012-218
012-219
012-221
012-223
012-224
012-235
012-236
012-237
012-238
012-239
012-240
012-247
012-255
012-260
012-282
012-291
[Cause] Finisher malfunction
[Remedy] Switch off the machine power, make sure that the touch screen is blank,
and then switch on the machine power. If the error still is not resolved,
contact our Customer Support Center.
012-225
012-226
012-227
012-228
012-229
012-230
012-241
012-243
012-246
012-265
[Cause] Booklet Unit malfunction
[Remedy] Switch off the machine power, make sure that the touch screen is blank,
and then switch on the machine power. If the error still is not resolved,
contact our Customer Support Center.
012-248
[Cause] Finisher Tray malfunction
[Remedy] Switch off the machine power, make sure that the touch screen is blank,
and then switch on the machine power. If the error still is not resolved,
contact our Customer Support Center.
012-250
012-251
012-252
012-253
[Cause] Folder Unit malfunction
[Remedy] Switch off the machine power, make sure that the touch screen is blank,
and then switch on the machine power. If the error still is not resolved,
contact our Customer Support Center.
012-254
[Cause] Folder Unit malfunction
[Remedy] Switch off the machine power, make sure that the touch screen is blank,
and then switch on the machine power. If the error still is not resolved,
contact our Customer Support Center.
Error Code Cause and Remedy
* If you cannot resolve an error despite following the instructions described in the table, contact our Customer Support
Center. The contact number is printed on the label or card attached on the machine.

Fuji Xerox ApeosPort-IV C7780 Specifications

General

Brand	Fuji Xerox
Model	ApeosPort-IV C7780
Category	All in One Printer
Language	English