15 Problem Solving
476
Problem Solving
15
016-311
016-312
016-313
016-314
016-315
016-317
016-318
016-319
016-320
016-321
016-322
016-323
016-325
016-326
[Cause] An error occurred.
[Remedy] Switch off the machine power, make sure that the touch screen is blank,
and then switch on the machine power. If the same message is displayed
again, contact our Customer Support Center.
016-330
016-331
016-332
[Cause] An error occurred.
[Remedy] Switch off the machine power, make sure that the touch screen is blank,
and then switch on the machine power. If the same message is displayed
again, contact our Customer Support Center.
016-335
016-336
016-337
016-338
016-339
016-340
016-341
016-342
[Cause] An error occurred.
[Remedy] Switch off the machine power, make sure that the touch screen is blank,
and then switch on the machine power. If the same message is displayed
again, contact our Customer Support Center.
016-345
016-347
016-348
016-350
016-351
016-360
016-362
016-363
016-364
016-365
016-366
016-367
016-368
016-369
016-370
016-371
[Cause] An error occurred.
[Remedy] Switch off the machine power, make sure that the touch screen is blank,
and then switch on the machine power. If the same message is displayed
again, contact our Customer Support Center.
016-400
[Cause] The user name or password for 802.1x authentication did not match.
[Remedy] Confirm and correctly enter the user name or password. If the error still is
not resolved, check whether the network environment is set correctly.
Error Code Cause and Remedy
* If you cannot resolve an error despite following the instructions described in the table, contact our Customer Support
Center. The contact number is printed on the label or card attached on the machine.