101 Network Basics
• For SUSE Linux Enterprise Desktop 10
1 Select Computer → More Applications... and select YaST on the Application Browser.
2 Enter the administrator password.
YaST Control Center is activated.
3 Select Hardware on YaST Control Center, and select Printer.
4 Printer setup: Autodetected printers is activated.
For network connections:
a Click Add.
b Select Network Printers as Printer Type, and click Next.
c Select the Print via LPD-Style Network Server as Printer Type, and click Next.
d Enter the IP address of the printer in Host name of the printer server.
e Enter the name of the printer queue in Name of the remote queue, and click Next.
f Enter the printer name in Name for printing.
NOTE:
• The Description of Printer and Location of Printer do not have to be specified.
g
Select the Do Local Filtering check box, and click Next.
h Select Fuji Xerox as Select manufacturer. Select XXX as Select Model, and click Next.
i Confirm the settings in Edit configuration, and click OK.
For USB connections:
a Select DocuPrint XXX on USB (//DocuPrint/XXX or /dev/usblp*) as Available are, and
click Configure….
b Confirm the settings in Edit configuration, and click OK.
5 Click Finish.
To Next Page
Loading...
Need help?
General
