Network Basics 76
îš„ Connecting Printer to Computer or Network
Connect the printer via Ethernet or USB. A USB connection is a direct connection and is not used for
networking. An Ethernet connection is used for networking. Hardware and cabling requirements vary
for the different connection methods. Ethernet cable and hardware are generally not included with
your printer and must be purchased separately.
The available features for each connection type are shown in the following table.
Connection Type Available Features
USB When connected via USB you can:
• Instruct print jobs from a computer.
• Scan and print an image into an application.
• Scan and print an image to a folder on the computer.
• Use the Address Book Editor to manage address book entries.
Ethernet When connected via Ethernet you can:
• Instruct print jobs from a computer on the network.
• Scan to a computer on the network.
• Scan to an FTP server.
• Scan to email.
• Use CentreWare Internet Services to manage address book
entries.
To Next Page
Loading...
Need help?
General
