59 Basic Operation
Setting Initial Settings on the Operator Panel
You need to set the printer language, country, clock date, and time when you turn on printer for the
first time.
When you turn on the printer, a wizard appears on the LCD panel. Follow the steps below to set the
initial settings.
NOTE:
• If you do not start configuring the initial settings, Ready appears on the LCD panel in three minutes. After that,
you can set the following initial setup by enabling Power On Wizard on the LCD panel or CentreWare
Internet Services if needed.
For more information on operator panel, see "Understanding the Printer Menus" on page 302.
For more information on CentreWare Internet Services, see "CentreWare Internet Services" on page 65.
1 Please Select Language appears. Select the language you want to use on the operator
panel from the following drop-down list, and then press the button.
2 Press the button to start setting the country.
3 Select your country, and then press the button.
4 Select the appropriate time zone, and then press the button.
5 Specify the current date, and then press the button.
6 Specify the current time, and then press the button.
7 Press the button for Fax Setup.
If you want to skip the Fax Setup, press the Start button to exit the wizard and to restart the
printer.
8 Enter your fax number, and then press the button.
9 Enter a name, and then press the button.
10 Press the button to exit the wizard and to restart the printer.
English
Simplified Chinese
Traditional Chinese
Korean
To Next Page
Loading...
Need help?
General
