Fuji Xerox DocuPrint CM305 df - Adjust ColorRegi; Clean Developer; Toner Refresh

Using the Operator Panel Menus and Keypad 334
• Adjust Fuser
Purpose:
To adjust the fusing temperature setting for each paper type.
The default settings may not give the best output on all paper types. When the printed paper has
curled, try to lower the temperature. When the toner does not fuse on the paper properly, try to
increase the temperature.
NOTE:
• The print quality changes depending on the setting values you select for this item.
Values:
• Auto Regi Adjust
Purpose:
To specify whether to automatically perform color registration adjustment.
Values:
Plain 0
*
-6 to +6
Light Card 0
*
-6 to +6
Heavy Card 0
*
-6 to +6
Envelope 0
*
-6 to +6
Labels 0
*
-6 to +6
LW Gloss Card 0
*
-6 to +6
HW Gloss Card 0
*
-6 to +6
Off Does not
automatically perform color registration adjustment.
On
*
Automatically performs color registration adjustment.