Fuji Xerox DocuPrint CM305 df - Using the Numeric Keypad to Enter Characters

Using the Operator Panel Menus and Keypad 366
Resetting to Factory Defaults
After executing Initialize NVM and rebooting the printer, all the menu parameters or data are reset to
their default values.
1 Press the System button.
2 Select Admin Menu, and then press the button.
3 Select Maintenance, and then press the button.
4 Select Initialize NVM, and then press the button.
5 Select the desired setting, and then press the button.
6 Select Yes, and then press the button.
The printer restarts automatically to apply the settings.