Copying 164
Making Copies From the ADF
IMPORTANT:
• Do not load more than 35 sheets into the ADF or allow more than 35 sheets to be fed to the document output
tray. The document output tray should be emptied before it exceeds 35 sheets or your original documents may
be damaged.
NOTE:
• To get the best scan quality, especially for gray scale images, use the document glass instead of the ADF.
• A computer connection is not required for copying.
To make a copy from the ADF:
1 Load up to 35 sheets of 75 gsm (20 lb) documents face up on the ADF with top edge of the
documents in first. Then adjust the document guides to the correct document size.
NOTE:
• Ensure that you use the document guides before copying a legal-size document.
2 Customize the copy settings including the number of copies, copy size, contrast, and image
quality.
See also:
• "Setting Copy Options" on page 165.
To clear the settings, use the Clear All button.
3 Press the Start button to begin copying.
NOTE:
• Press the Stop button to cancel a copy job at any time while scanning a document.
To Next Page
Loading...
Need help?
General
