Copying 162
Making Copies From the Document Glass
NOTE:
• A computer connection is not required for copying.
• Remove any documents from the ADF before copying from the document glass.
• Contaminants on the document glass may cause black spots on the copy output. For best results, clean the
document glass before use. For more information, see also "Cleaning the Scanner" on page 457.
To make a copy from the document glass:
1 Lift and open the document cover.
2 Place the document face down on the document glass and align it with the registration guide on
the top left corner of the glass.
• Do not apply excessive force to hold thick document on the document glass. It may break the
glass and cause injuries.
To Next Page
Loading...
Need help?
General
