Faxing 272
îš„ Receiving a Fax Manually Using an External Telephone
This feature works best when you are using an external telephone connected to the phone connector
( ) on the rear of your printer. You can receive a fax from someone you are talking to on the external
telephone without having to go to the printer.
When you receive a call on the external telephone and hear fax tones, press the two-digit keys on the
external telephone, or set OnHook to On and then press the Start button.
The printer receives the document.
Press the buttons slowly in sequence. If you still hear the fax tone from the remote machine, try
pressing the two-digit keys once again.
The remote receive code is set to Off at the factory. You can change the two-digit number to
whatever you choose. For details on changing the code, see "Available Fax Settings Options" on
page 294.
NOTE:
• Set the dialing system of your external telephone to DTMF.
To Next Page
Loading...
Need help?
General
