177 Copying
îš„ Lighten/Darken
To adjust the contrast to make the copy lighter or darker than the original.
1 Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the document glass, and close the document cover.
See also:
• "Making Copies From the Document Glass" on page 162
• "Making Copies From the ADF" on page 164
2 Press the Copy button.
3 Select Lighten/Darken, and then press the button.
4 Select the desired setting, and then press the button.
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.
5 Press the Start button to begin copying.
Lighter3 Works well with dark print.
Lighter2
Lighter1
Normal* Works well with normal typed or printed documents.
Darker1 Works well with light print or faint pencil markings.
Darker2
Darker3
To Next Page
Loading...
Need help?
General
