Fuji Xerox DocuPrint CM305 df - For Mac os X

Faxing 264
 For Mac OS X
NOTE:
• The names of the dialog boxes and the buttons may be different from those given in the following procedure
depending on the application you are using.
• To use this feature, you must install the fax driver.
1 Open the file you want to send by fax.
2 Open the print dialog box from the application, and then select FUJI XEROX DocuPrint CM305
df.
NOTE:
• Select the printer name that you specified when adding the printer.
3 Select Fax Setting.
4 Specify the fax settings.
NOTE:
• The settings done here are only applied to a single fax job.
5 Click Print.
The Set / Check Fax Transmission dialog box appears.