Fuji Xerox DocuPrint CM305 df User Manual

Using the Operator Panel Menus and Keypad 328
• mm / inch
Purpose:
To specify the default measurement unit displayed after the numeric value on the operator panel.
Values:
Fault Tone Off Does not emit a tone when a job ends abnormally.
Soft Emits a tone when a job ends abnormally.
Normal
*
Loud
Alert Tone Off Does not emit a tone when a problem occurs.
Soft Emits a tone when a problem occurs.
Normal
*
Loud
Out of Paper Off Does not emit a tone when the printer runs out of paper.
Soft Emits a tone when the printer runs out of paper.
Normal
*
Loud
Low Toner Off Does not emit a tone when a toner is low.
Soft Emits a tone when a toner is low.
Normal
*
Loud
Auto Clear Alert Off
*
Does not emit a tone 5 seconds before the printer performs auto
clear.
Soft Emits a tone 5 seconds before the printer performs auto clear.
Normal
Loud
Base Tone Off
*
Does not emit a tone when the operator panel display is returned to
the default setting by scrolling the loop menu.
Soft Emits a tone when the operator panel display is returned to the
default setting by scrolling the loop menu.
Normal
Loud
All Tones Off Disables all the alert tones.
Soft Sets the volume of all the alert tones at once.
Normal
*
Loud
Millimeters (mm)
*
Selects millimeter as the default measurement unit.
Inches (") Selects inch as the default measurement unit.
NOTE:
• The default for mm/inch varies depending on other settings, such as Country and Document
Size.

Fuji Xerox DocuPrint CM305 df Specifications

General

Brand	Fuji Xerox
Model	DocuPrint CM305 df
Category	Printer
Language	English