171 Copying
M.F. Paper Type
To select the default paper type of the SSF.
1 Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the document glass, and close the document cover.
See also:
• "Making Copies From the Document Glass" on page 162
• "Making Copies From the ADF" on page 164
2 Press the Copy button.
3 Select Paper Supply, and then press the button.
4 Select Manual Feed Slot, and then press the button.
5 Select M.F. Paper Type, and then press the button.
6 Select the desired setting, and then press the button.
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.
7 Press the Start button to begin copying.
Plain*
Light Card
Heavy Card
Envelope
Letterhead
LW Gloss Card
HW Gloss Card
Hole Punched
Colored
Special
To Next Page
Loading...
