Troubleshooting 414
Ghosting
Problem Action
The printed result has ghosting. If the type of the ghosting is positive ghost:
Replace the drum cartridge if you have a spare cartridge.
See also:
• "Replacing the Drum Cartridge" on page 474
• "Installing the Drum Cartridge" on page 477
If the problem persists, contact the Fuji Xerox local representative
office or an authorised dealer.
If the type of the ghosting is negative ghost:
Verify that the print media recommended for the printer is being used.
If you are using non-recommended print media, use the print media
recommended for the printer.
If the problem is solved, adjust the transfer bias.
If the problem persists, replace the drum cartridge if you have a spare
cartridge.
Adjust the transfer bias.
1 On the operator panel, press the System button and select Admin
Menu → Maintenance → Adjust BTR.
2 Adjust the setting for the type of print media being used.
If the problem persists, contact the Fuji Xerox local representative
office or an authorised dealer.
To Next Page
Loading...
