111 Printing Basics
îš„ Print Media Usage Guidelines
The printer tray accommodates most sizes and types of paper and other specialty media. Follow these
guidelines when loading paper and media in the tray:
• Envelopes can be printed from the single sheet feeder (SSF) and standard 250-sheet tray.
• Fan paper or other specialty media before loading in the paper tray.
• Do not print on label stock once a label has been removed from a sheet.
• Use only paper envelopes. Do not use envelopes with windows, metal clasps, or adhesives with
release strips.
• Print all envelopes single-sided only.
• Some wrinkling and embossing may occur when printing envelopes.
• Do not overload the paper tray. Do not load print media above the fill line on the inside of the
paper width guides.
• Adjust the paper width guides to fit the paper size.
• If excessive jams or wrinkles occur, use paper or other media from a new package.
See also:
• "Loading Print Media in the Standard 250-Sheet Tray and the Optional 250-Sheet Feeder" on page 121
• "Loading Envelope in the Standard 250-Sheet Tray" on page 123
• "Loading Print Media in the Single Sheet Feeder (SSF)" on page 125
• "Loading Envelope in the Single Sheet Feeder (SSF)" on page 126
• "Printing on Custom Size Paper" on page 149
• Do not use conductive paper such as origami paper, carbonic paper or conductively-coated paper.
When paper jam occurs, it may cause short-circuit and eventually a fire accident.
To Next Page
Loading...
Need help?
General
