189 Copying
Changing the Default Settings
The default settings of the Copy menu options including contrast and image quality can be set to the
most frequently used modes. When you copy a document, the specified default settings are used
unless they are changed by using the corresponding buttons on the operator panel.
To create your own default settings:
1 Press the System button.
2 Select Defaults Settings, and then press the button.
3 Select Copy Defaults, and then press the button.
4 Select the desired menu item, and then press the button.
5 Select the desired setting or enter the value using the numeric keypad, and then press the
button.
6 Repeat steps 4 and 5 as needed.
7 To return to the previous screen, press the (Back) button.
To Next Page
Loading...
