Scanning 238
IP Address Settings
In the IP Address Settings tab, you can check the IP address that is set for your scanner or change
the scanner selection.
• IP Address
Enter the IP address.
• Search for all scanners on the network (Windows only)
Searches scanners in your network.
• Scanner List
Displays a list of scanners that are detected.
• Search again
Searches the scanners in your network.
• Search Criteria (Windows only)
Displays the Search Criteria dialog box for setting the search condition.
Search Criteria Dialog Box (Windows only)
• Broadcast address
Enter the subnet address.
• IPv4: Broadcast Address such as 192.168.1.255
• IPv6: Multicast Address such as ff02::1
• Search Time
Specify a time period for searching a scanner.
• Community Name
Enter the SNMPv1/v2 community name. The default community name is "public".
To Next Page
Loading...
