173 Copying
Reduce/Enlarge
To reduce or enlarge the size of a copied image, from 25 % to 400 % when you copy original
documents from the document glass or ADF.
NOTE:
• When you make a reduced copy, black lines may appear at the bottom of your copy.
1 Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the document glass, and close the document cover.
See also:
• "Making Copies From the Document Glass" on page 162
• "Making Copies From the ADF" on page 164
2 Press the Copy button.
3 Select Reduce/Enlarge, and then press the button.
4 Select the desired setting, and then press the button.
• mm series
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.
200%
141% A5 → A4
122% A5 → B5
100%*
81% B5 → A5
70% A4 → A5
50%
To Next Page
Loading...
