183 Copying
îš„ 2-Sided
To make duplex copies with the specified binding position.
1 Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the document glass, and close the document cover.
See also:
• "Making Copies From the Document Glass" on page 162
• "Making Copies From the ADF" on page 164
2 Press the Copy button.
3 Select 2-Sided, and then press the button.
4 Select the desired setting, and then press the button.
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.
5 Press the Start button to begin copying.
1 -> 1-Sided* Select 1-sided or 2-sided and specify binding position for the 2-sided
copy.
Long Edge Binding
Short Edge Binding
To Next Page
Loading...
Need help?
General
