Using the Operator Panel Menus and Keypad 340
îš„ Defaults Settings
Use Defaults Settings to modify the defaults for the Copy, Scan, Fax, or Print from USB menu.
Copy Defaults
Purpose:
To modify the defaults for the Copy menu.
Copy Defaults allows you to configure the following items in addition to the items under the Copy
menu.
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.
•Color
Purpose:
To select color or black and white copying.
Values:
• Paper Supply
Purpose:
To specify the input tray.
Values:
NOTE:
• Tray 2 is available only when the optional 250-sheet feeder is installed.
Black & White Copies in black and white mode.
Color
*
Copies in color mode.
Tray 1* The paper is fed from the standard 250-sheet tray.
Tray 2 The paper is fed from the optional 250-sheet feeder.
Manual Feed Slot The paper is fed from the single sheet feeder (SSF).
To Next Page
Loading...
Need help?
General
