273 Faxing
îš„ Receiving Faxes Using the DRPD Mode
The Distinctive Ring Pattern Detection (DRPD) is a telephone company service which enables a user
to use a single telephone line to answer several different telephone numbers. The particular number
someone uses to call you on is identified by different ringing patterns, which consist of various
combinations of long and short ringing sounds.
Before using the DRPD option, Distinctive Ring service must be installed on your telephone line by the
telephone company. To set up DRPD, you will need another telephone line at your location, or
someone available to dial your fax number from outside.
To set up the DRPD:
1 Press the System button.
2 Select Admin Menu, and then press the button.
3 Select Fax Settings, and then press the button.
4 Select DRPD Pattern, and then press the button.
5 Select the desired pattern, and then press the button.
6 Reboot the printer by turning the power switch off and then on again.
To receive faxes in the DRPD, you need to set the menu to DRPD. For details, see "Available
Fax Settings Options" on page 294.
To Next Page
Loading...
Need help?
General
