339 Using the Operator Panel Menus and Keypad
• Secure Receive
NOTE:
• Secure Receive feature is available only when Panel Lock Set is set to Enable.
Purpose:
To specify whether to require a password to receive faxes, and to set or change the password.
Values:
• Login Error
NOTE:
• Login Error feature is available only when Panel Lock Set is set to Enable.
Purpose:
To specify the number of error entry attempts allowed when you log in as an administrator in the
Admin Menu and Report/List menu.
Values:
Scan to Network Unlocked* Enables the Scan to Network service.
Locked Disables the Scan to Network service.
Password Locked Enables the Scan to Network service, but requires a
password.
Scan to
USBMemory
Unlocked* Enables the Scan to USB Memory service.
Locked Disables the Scan to USB Memory service.
Password Locked Enables the Scan to USB Memory service, but requires a
password.
Print from USB Unlocked* Enables the Print from USB service.
Locked Disables the Print from USB service.
Password Locked Enables the Print from USB service, but requires a password.
Color Pass.
Locked
Enables the Print from USB service with a color mode, but
requires a password.
Change Password
*1
Changes the password that is set under the Service Lock
menu.
*1
This item is available only when Password Locked or Color Pass. Locked is enabled.
SecureReceiveSet Disable
*
Does not require a password to receive faxes.
Enable Requires a password to receive faxes.
Change Password
*1
0000–9999 Sets or changes the password required to receive faxes.
*1
This item is available only when SecureReceiveSet is set to Enable.
Off
*
Does not allow an administrator to log in after one error entry attempt.
On 5 times
*
Sets the number of error entry attempts allowed when an
administrator logs in.
1-10