297 Faxing
•Prefix Dial
NOTE:
• Prefix Dial supports only the environment where you send a fax to the external line number. To use Prefix Dial,
you must do the following from the operator panel.
1 Press the System button.
2 Select Admin Menu, and then press the button.
3 Select Fax Settings, and then press the button.
4 Select Line Type, and then press the button.
5 Select PBX, and then press the button.
6 Select Prefix Dial, and then press the button.
7 Select On, and then press the button.
8 Select Prefix Dial Num, and then press the button.
9 Enter an up-to-five-digit prefix number from 0–9, *, and #, and then press the button.
10 Reboot the printer by turning the power switch off and then on.
To Next Page
Loading...
