Faxing 286
îš„ Using the Secure Receiving Mode
You may need to prevent your received faxes from being accessed by unauthorized people. You can
turn on the secure fax mode using the Secure Receive option to restrict printing out all of the
received faxes when the printer is unattended. In the secure receiving mode, all incoming faxes will go
in memory. When the mode turns off, any faxes stored will be printed.
NOTE:
• Before operation, ensure Panel Lock is enabled.
To turn the secure receiving mode on:
1 Press the System button.
2 Select Admin Menu, and then press the button.
3 Select Secure Settings, and then press the button.
4 Select Secure Receive, and then press the button.
5 Select SecureReceiveSet, and then press the button.
6 Select Enable, and then press the button.
7 Select Change Password, and then press the button.
8 Enter a four-digit password using the numeric keypad, and then press the button.
9 To return to the top level of the System menu, press the Clear All button.
When a fax is received in the secure receiving mode, your printer stores it into memory and the
Active Jobs screen displays Secure Receive to let you know that there is a fax stored.
To print received documents:
1 Press the Print button.
2 Select Secure Receive, and then press the button.
3 Enter the password, and then press the button.
The faxes stored in memory are printed.
To turn the secure receiving mode off:
1 Access the SecureReceiveSet menu by following steps from 1 to 5 in "To turn the secure
receiving mode on:".
2 Select Disable, and then press the button.
To cancel the changed setting and return to the top level of the System menu, press the Clear All
button.
To Next Page
Loading...
Need help?
General
