Faxing 246
îš„ Setting the Time and Date
NOTE:
• It may be necessary to reset the correct time and date if loss of power to the printer occurs.
To set the time and date:
1 Press the System button.
2 Select Admin Menu, and then press the button.
3 Select System Settings, and then press the button.
4 Select Clock Settings, and then press the button.
5 Select Set Date & Time, and then press the button.
6 Select the desired time zone, and then press the button.
7 Enter the correct date using the numeric keypad, or select the correct date using the or
button.
NOTE:
• If you make a mistake while entering numbers, press the button to re-enter the digit.
8 Press the button when the date on the display is correct.
9 Enter the correct time using the numeric keypad, or select the correct time using the or
button.
10 Press the button when the time on the display is correct.
11 To cancel the changed setting and return to the top level of the System menu, press the Clear All
button.
To Next Page
Loading...
Need help?
General
