271 Faxing
îš„ Receiving a Fax Automatically in the TEL/FAX Mode or
Ans/FAX Mode
To use the TEL/FAX Mode or Ans/FAX Mode, you must connect an external telephone to the phone
connector ( ) on the rear of your printer.
If the caller leaves a message, the answering machine stores the message as it would normally. If
your printer hears a fax tone on the line, it automatically starts to receive a fax.
NOTE:
• If you have set your printer to Ans/FAX Mode and your answering machine is turned off, or no answering
machine is connected to your printer, your printer will automatically go into the FAX Mode after a predefined
time.
To Next Page
Loading...
Need help?
General
