Using the Operator Panel Menus and Keypad 352
• Image Compression
Purpose:
To specify the image compression level.
Values:
• Max Email Size
Purpose:
To specify the maximum size of e-mail that can be sent, within the range of 50 K bytes to 16384 K
bytes. The default is 2048 K bytes.
Fax Defaults
Purpose:
To modify the defaults for the Fax menu.
Fax Defaults allows you to configure the following items in addition to the items under the Fax
menu.
NOTE:
• The FAX service cannot be used unless you set up a country code under Country. If Country is not set up,
a message Set the Country Code appears on the display.
• Values marked by an asterisk (*) are the factory default menu settings.
• Resolution
Purpose:
To specify the scan resolution to improve the output quality.
Values:
NOTE:
• Faxes scanned in the Super Fine mode transmit at the highest resolution supported by the receiving device.
Higher Sets the image compression level to Higher.
Normal
*
Sets the image compression level to Normal.
Lower Sets the image compression level to Lower.
Standard
*
Suitable for documents with normal sized characters.
Fine Suitable for documents containing small characters or thin lines or
documents printed using a dot-matrix printer.
Super Fine Suitable for documents containing extremely fine detail. The Super
Fine mode is enabled only if the remote machine also supports the
Super Fine mode. See the notes below.
Photo Suitable for documents containing photographic images.
To Next Page
Loading...
Need help?
General
