21 Safety Notes
Locate this product in a well-ventilated area. Do not obstruct ventilation openings of the
product.
Keep the minimum clearance as follows for ventilation and an access to the power plug.
Unplug the product if an abnormal condition is noted.
Do not incline the product at more than 10 degree angle. Otherwise, it may fall over and cause
injuries.
To bundle wires and cables, always use the cable ties and spiral tubes that Fuji Xerox supplies.
Otherwise, it may cause some defects.
100 mm
780 mm
904.4 mm
600 mm
250 mm
532.4 mm 100 mm
320 mm
600 mm 532.4 mm 100 mm
10° 10°
10° 10°
Right Left Right Left
Front Rear Front Rear
To Next Page
Loading...
