55 Basic Operation
8 Insert the standard 250-sheet tray into the printer, and push until it stops.
IMPORTANT:
• Do not use excessive force on the tray. Doing so could damage the tray or the inside of the printer.
9 Reconnect all cables into the rear of the printer and turn on the printer.
NOTE:
• The printer will automatically detect the attached tray but will not detect the paper type.
10 Print the System Settings page to confirm the optional 250-sheet feeder is installed correctly.
a Press the System button.
b Select Report/List, and then press the button.
c Select System Settings, and then press the button.
The System Settings page is printed.
11 Confirm Tray 2 (250 Sheet Feeder) is listed under Printer Options in the System Settings page.
If the feeder is not listed, turn off the printer, unplug the power cord, and re-install the optional
250-sheet feeder.
12 After loading paper in the optional 250-sheet feeder, specify the paper type from the printer
operator panel.
a Press the System button.
To Next Page
Loading...
Need help?
General
