Network Basics 84
19 Ensure that the message This Setting Becomes Effective after Restart appears,
and then press any button.
20 Press the button to select Gateway Address, and then press the button.
The cursor is located at the first octet of the gateway address.
21 Enter the value of the gateway address using the numeric keypad.
22 Press the button.
The cursor moves to the next octet.
23 Repeat steps 21 to 22 to set gateway address, and then press the button.
24 Ensure that the message This Setting Becomes Effective after Restart appears,
and then press any button.
25 Turn off and turn on the printer.
See also:
• "Operator Panel" on page 44
To Next Page
Loading...
Need help?
General
