GE D90 Plus - Page 590

To Next Page

To Previous Page

580 D90

PLUS

LINE DISTANCE PROTECTION SYSTEM – INSTRUCTION MANUAL

METERING FLEXANALOG PARAMETERS CHAPTER 11: METERING

SRC 1 Vx RMS...............................................

Metered RMS auxiliary voltage for source 1

SRC 1 Vx Angle............................................

Metered auxiliary voltage angle for source 1

SRC 1 Vx Mag ..............................................

Metered auxiliary voltage magnitude for source 1

SRC 1 V0 Angle............................................

Metered zero-sequence voltage angle for source 1

SRC 1 V0 Mag ..............................................

Metered zero-sequence voltage magnitude for source 1

SRC 1 V1 Angle............................................

Metered positive-sequence voltage angle for source 1

SRC 1 V1 Mag ..............................................

Metered positive-sequence voltage magnitude for source 1

SRC 1 V2 Angle............................................

Metered negative-sequence voltage angle for source 1

SRC 1 V2 Mag ..............................................

Metered negative-sequence voltage magnitude for source 1

SRC 2 ...............................................................

The analog parameters shown above are available for sources

2 and above.

Tracking frequency analog operand

Tracking frequency...................................

Metered tracking frequency

Other manuals for GE D90 Plus