608 D90
PLUS
LINE DISTANCE PROTECTION SYSTEM – INSTRUCTION MANUAL
USER-PROGRAMMABLE PUSHBUTTONS CHAPTER 12: LOCAL INTERFACE
Choose Selector
Range: 1 to 10 in steps of 1
Default: 1
This setting selects the selector switch number to associate with the current control key.
This setting is available when the
Button Type is “Selector Switch.”
State 1 Text, State 2 Text,..., State 10 Text
Range: up to 19 alphanumeric characters
Default: ---
These settings specify the text to display under the selector switch name for each switch
position. These settings are available when the
Button Type is “Selector Switch.”
To Next Page
Loading...
