GE LOGIQ P6 Series User Manual

GE HEALTHCARE
DIRECTION 5394152, Revision 5
LOGIQ™ P6/P6 PRO SERVICE MANUAL
Page 9-16 Section 9-9 - Cables
Section 9-9 Cables (cont’d)
Item Part Name FRU Number Description Qty FRU R1.0.x R2.0.x~ R3.0.x~
701 Top Cable Assy 1 5252344
Mon Pwr Cable, BW PWR
Cable, Speaker cables
1. Mon PWR Cable,
Connect one side
(Labe
l:MON)
to LP6 17"
LCDMON Assy and
another
side (
Label: CON
11) to
Lable
CON 11 of
Intern
al AC Powe
r cable
assy
2. BW PWR Cable,
Connect one side
(Labe
l:CON10)
to Label
CON10 of U
SB CON Cable
and another side (Label:
CON9) to Lable CON9 of
LP6 ARP II Assy
3. Speaker Cable,
Connect one side (
Label: L
& R) to Label L,R of LP6
Speaker Assy and another
side (Label:J207) to PCB
Silk J207 of LP6 Backplane
Assy
1 1 Yes Yes Yes
702 Top Cable Assy 2 5252345
DVI Cable, SPK cable, KB
Control cable, KB USB
cable,
1. DVI Cable,
Connect one side
(Labe
l:DVI)
to LP6
17"LCDMON Assy and
another
side (Label:J206
)
to PCB Sil
k J206
of LP6
Backplane Assy
2. Keybo
ard Control Cable,
Connect one side
(Labe
l:CON1)
to Label
CON1 of LP6 Keyboar
d
Assy and another side
(Labe
l: J209)
to PCB Silk
J209 of LP6 Backplane
As
sy
3. Keyboard U
SB Cable,
Connect one side
(Labe
l:KBD)
to LP6
Keyboard Assy
and anoth
er side (Label:
J221) to PCB Silk J221 of
LP6 Backplane Assy
4. BW Print USB Cable,
Connect one side
(Labe
l:PRN)
to BW Printer
Brack
et
and another side
(Label:
J223) to PCB Silk J223 of
LP6 Backplane Assy
1
1 Yes Yes Yes
Table 9-9 Cables

GE LOGIQ P6 Series Specifications

General

Power Supply	100-240 VAC, 50/60 Hz
Imaging Modes	B-Mode, M-Mode, Color Doppler, Power Doppler
Applications	Vascular, Musculoskeletal
Operating Temperature	10°C to 40°C
Display	15-inch LCD
Relative Humidity	20% to 80% (non-condensing)