Structured Findings
Vivid S70 / S60 – User Manual 11-21
BC092760-1EN 01
Inserting variable parameters in a statement
Variable parameters such as patient name, institution name,
measurement values...etc can be inserted in a statement as
tagged information.
To insert variable parameters in a statement:
1. Place the cursor at the required position in the Findings text
field (or Conclusion text field).
2. Press Insert parameter.
The Insert parameter window is displayed (see
Figure 11-11).
Figure 11-11. Insert parameter window
3. Browse and select the actual parameter to insert.
NOTE: For measurement values, select first the scanning mode.
4. Press OK.
NOTE: To display correctly in the report, the actual parameter value
must exist, e.g. if a measurement value is included in a
statement as a variable parameter, a measurement value
must exist for the current patient, otherwise the parameter
name is displayed.
To Next Page
Loading...
