Site requirements
Vivid S70 / S60 – User Manual 3-5
BC092760-1EN 01
Voltage level check
Check the rating label on the rear side of the system (see
Figure 3-1).
Figure 3-1. The rating label location
Check the voltage range indicated on the label:
• 100–240 VAC, 50/60 Hz, 500 VA
At 110 V: 6.4 A
At 115 V: 6.0 A
At 230 V: 3.0 A
If the mains supply is not within the specified range, do not
connect the system to the power source. Contact your local
distributor or the appropriate support resource.
To Next Page
Loading...
