GW Instek MFG-2000 Series - ASK Amplitude

MODULATION
129
ASK Amplitude
The default ASK amplitude is 0.5V. Internally modulated
waveforms use a square wave with a 50% duty cycle.
Panel Operation
1. Press the MOD key.

2. Press F2 (ASK).
K

3. Press F2 (ASK Ampl).
K

4. The ASK Ampl parameter will become
highlighted in the Waveform Display area.
5. Use the selector keys and
scroll wheel or number pad
to enter the modulation
amplitude.

/


 



6. Choose a unit type by
pressing F2~F6.
dB
~
V
Range
ASK Ampllitue
0V~max
Default
0.5V