GW Instek MFG-2000 Series - Source[1|2|3|3 Rf]:Sweep:time

MFG-2000 Series User Manual
332
Sets the spacing to linear.
Query Syntax
SOURce[1|2|3|3RF]:SWEep:SPACing?
Return Parameter
LIN
Linear spacing
LOG
Logarithmic spacing
Example
SOUR1:SWE:SPAC?
LIN
The spacing is currently set as linear.
SOURce[1|2|3|3RF]:SWEep:TIME
Source Specific
Command
Description
Sets or queries the sweep time. The default sweep
time is 1 second.
Note
The function generator automatically determines
the number of frequency points that are used for
the sweep based on the sweep time.
Syntax
SOURce[1|2|3|3RF]:SWEep:TIME
{<seconds>|MINimum|MAXimum}
Parameter
<seconds>
1 ms ~ 500 s
Example
SOUR1:SWE:TIME +1.0000E+00
Sets the sweep time to 1 second.
Query Syntax
SOURce[1|2|3|3RF]:SWEep:TIME? {<seconds>|
MINimum|MAXimum}
Return Parameter
<NR3>
Returns sweep time in
seconds.
Example
SOUR1:SWE:TIME?
+1.00000E+00
Returns the sweep time (1 seconds).